Translate this page: Spanish
Micromeritics' AutoPore IV 9500 Series
characterizes a material’s porosity by applying various levels of pressure to a sample immersed in mercury. The pressure required to intrude mercury into the sample’s pores is inversely proportional to the size of the pores. This is called mercury porosimetry, or often, “mercury intrusion.”
The AutoPore IV series provides high-quality analysis data and comes with enhanced data reduction and reporting packages, faster pressure ramp rates, a more flexible and controllable vacuum system, and a redesign of both the low-and high-pressure generation systems.
• Instrument and/or Accessory Quote • U.S.A. Sales Engineer Locator • International Contact Information
• Contract Sample Analysis • Operator Training
The term "porosimetry" is often used to include the measurements of pore size, volume, distribution, density, and other porosity-related characteristics of a material. Porosity is especially important in understanding the formation, structure, and potential use of many substances. The porosity of a material affects its physical properties and, subsequently, its behavior in its surrounding environment. The adsorption and permeability, strength, density, and other factors influenced by a substance’s porosity determine the manner and fashion in which it can be appropriately used.
The mercury porosimetry analysis technique is based on the intrusion of mercury into a porous structure under stringently controlled pressures. Besides offering speed, accuracy, and a wide measurement range, mercury porosimetry permits you to calculate numerous sample properties such as pore size distributions, total pore volume, total pore surface area, median pore diameter, and sample densities (bulk and skeletal).
The AutoPore IV Series Mercury Porosimeters can determine a broader pore size distribution (0.003 to 1100 micrometers*) more quickly and accurately than other methods. These instruments are enhanced with features that enable them to more accurately gather the data needed to characterize the porous structure of solid materials. They also offer new data reduction and reporting choices that provide more information about pore geometry and the fluid transport characteristics of the material.
*Calculated with an initial filling pressure of 0.2psia (0.00128MPa)
Wide Variety of Benefits
- Capability to measure pore diameters from 0.003 to ~1100 µm*
- Low noise, high-pressure generating system
- Enhanced data reduction package; includes tortuosity, permeability, compressibility, pore-throat ratio, fractal dimension, Mayer-Stowe particle size, and more
- Operates in scanning and time – or rate – equilibrated modes
- Collects extremely high-resolution data; better than 0.1 µL for mercury intrusion and extrusion volumes
- Controlled evacuation prevents powder fluctuation
- Controlled pressure can increase in increments as fine as 0.05 psia from 0.2 to 50 psia. This allows detailed data to be collected in the macropore region.
- A quick-scan mode allows a continuous pressure increase approximating equilibrium and providing faster screening. The high repeatability and reproducibility of this method by the AutoPore means that small, but significant, differences between samples will be detected. You can use this technique to screen a sample for conformity to specification because repeatability remains high.
- High-resolution (sub-microliter) measurement of intrusion/extrusion volumes produces extraordinary precision allowing the development of tighter sample specifications, improved production processes, and high-quality research data.
- A choice of correction routine for baseline (automatic, differential, or manual) produces greater accuracy by correcting for compressibility and thermal effects caused by high pressure.
- Choice of pressure ramping methods lets you choose the scanning technique for high-speed or on-demand results, or equilibration techniques for more accurate results with greater detail.
- The instrument allows the user to program data collection using a minimum number of data points. However, during intervals of unexpectedly large amounts of intrusion, the AutoPore will automatically collect additional data points.
- Choose between three data plot routines constructed of collected data points, a continuous curve plotted from interpolated data, or a combination of points and curves.
- A variety of pore volume, pore area, and pore size plots is available as well as the ability to calculate total intrusion volume, total pore (surface) area, median pore diameter, average pore diameter, bulk density, and apparent (skeletal) density.
|The Mercury QuikVac|
portable mercury spill vacuum is now available.
Mercury QuikVac Brochure
Ordering Part Number: 090-00000-00
Link to: CUSTOM ENGINEERED PRODUCTS
Since the 1960's Micromeritics has been modifying standard products and accessories to accommodate special needs. We have now expanded this service to include custom-designed analyzers and accessories.
A Note About 32- and 64-Bit Windows and Micromeritics' Software
Micromeritics products are designed to operate in most Microsoft Windows environments. However, more current versions of Microsoft Windows, specifically the 64-bit version of Windows 7, lack some of the services once offered by Microsoft. Because of this, Micromeritics applications will not operate with 64-bit operating systems. Micromeritics software applications are directly compatible with 32-bit version operating systems only. In cases where a 64-bit operating system may be corporate-required or essential for running other software programs, Virtual PC software and a 32-bit operating system should be installed on the host computer (64 bit) as a guest operating system. This will allow proper installation and operation of the Micromeritics application.